(b) Remove the mode cam.
(c) Remove the bolt and heater pivot.
(d) Remove the 9 bolts and mode case.
(e) Remove the evaporator core as shown in the illustration.
If a new evaporator is installed, add compressor oil to the
evaporator as follows.
for HFC-134a (R134a)
ND-OIL 8 or equivalent
for HFO-1234yf (R1234yf)
ND-OIL 12 or equivalent
Add 40 cc (1.4 fl.oz.)
(f) Remove the 2 different seals from the evaporator inlet and outlet