Tacoma

Toyota Tacoma 2015-2018 Air Conditioning Workshop Manual

Last Modified: 11-13-2015 6.6 A Doc ID: RM000005VRH000X
Model Year Start: 2016 Model: Tacoma Prod Date Range: [08/2015 - ]
Title: AIR CONDITIONING: AIR CONDITIONING PRESSURE SENSOR: INSTALLATION; 2016 MY Tacoma
[08/2015 - ]
INSTALLATION
1. INSTALL AIR CONDITIONER PRESSURE SENSOR
(a) Remove the vinyl tape from the air conditioner tube and accessory assembly and connecting part of the air
conditioner pressure sensor.
(b) Apply sufficiently compressor oil to a new O-ring and fitting surface of the air conditioner pressure sensor.
Compressor oil:
for HFC-134a (R134a)
ND-OIL 8 or equivalent
for HFO-1234yf (R1234yf)
ND-OIL 12 or equivalent
NOTICE:
K
eep the O-rings and O-ring fitting surfaces free of foreign matter.
(c) Using a 27 mm deep socket wrench, install the air conditioner
pressure sensor.
Text in Illustration
*a Turn
*b Hold
Torque:
11 N·m {110 kgf·cm, 8ft·lbf}
(d) Connect the connector.
2. CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT
3. WARM UP ENGINE
4. INSPECT FOR REFRIGERANT LEAK
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *