Tacoma

Toyota Tacoma 2015-2018 Air Conditioning Workshop Manual

OK
3.
CHECK HARNESS AND CONNECTOR (COOLER THERMISTOR SENSOR (EVAPORATOR
TEMPERATURE SENSOR) - AIR CONDITIONING AMPLIFIER ASSEMBLY)
(a) Disconnect the A17 cooler thermistor sensor (evaporator temperature sensor) connector.
(b) Disconnect the A14 air conditioning amplifier assembly connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
TESTER CONNECTION CONDITION SPECIFIED CONDITION
A14-6 (TE) - A17-2 Always Below 1 Ω
A14-32 (SG-2) - A17-1 Always Below 1 Ω
A14-6 (TE) or A17-2 - Body ground Always 10 kΩ or higher
A14-32 (SG-2) or A17-1 - Body ground Always 10 kΩ or higher
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK
REPLACE AIR CONDITIONING AMPLIFIER
ASSEMBLY
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *