Tacoma

Toyota Tacoma 2015-2018 Air Conditioning Workshop Manual

OK
OK
OK
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
4.
CHECK HARNESS AND CONNECTOR (MG CLT RELAY - AIR CONDITIONING AMPLIFIER
ASSEMBLY AND MAGNET-CLUTCH ASSEMBLY)
(a) Remove the MG CLT relay.
(b) Disconnect the A14 air conditioning amplifier assembly connector.
(c) Disconnect the A1 magnet-clutch assembly connector.
(d) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
TESTER CONNECTION CONDITION SPECIFIED CONDITION
MG CLT-2 - A14-18 (MGC) Always Below 1 Ω
MG CLT-3 - A1-1 (MG+) Always Below 1 Ω
MG CLT-2 or A14-18 (MGC) - Body ground Always 10 kΩ or higher
MG CLT-3 or A1-1 (MG+) - Body ground Always 10 kΩ or higher
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
5. INSPECT MAGNET-CLUTCH ASSEMBLY
(a) Remove the magnet-clutch assembly .
(b) Inspect the magnet-clutch assembly .
NG
REPLACE MAGNET-CLUTCH ASSEMBLY
cardiagn.com

Leave a Reply

Your email address will not be published. Required fields are marked *