NAVIGATION RECEIVER (for DVD) > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL CENTER


    B208365

  1. Using a moulding remover, detach the 3 clips and 2 claws, and then remove the cluster finish panel.

  1. Disconnect the connector.



3. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL CENTER


    B208366

  1. Using a moulding remover, detach the 3 clips and 2 claws, and then remove the cluster finish panel.

  1. Disconnect the connector.



4. REMOVE NAVIGATION RECEIVER ASSEMBLY WITH BRACKET


  1. for 2AD-FTV, 2AD-FHV:

    1. Remove the 4 bolts.



    2. Pull the navigation receiver to detach the 2 claws and 4 clips on the backside of the navigation receiver.


      B220641

    3. Disconnect all the connectors and remove the navigation receiver.



  1. except 2AD-FTV, 2AD-FHV:

    1. Remove the 4 bolts.



    2. Pull the navigation receiver to detach 2 claws and 4 clips on the backside of the navigation receiver.


      B219744

    3. Disconnect all the connectors and remove the navigation receiver.



5. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for 2AD-FTV, 2AD-FHV)


  1. Detach the 4 claws and remove the instrument cluster finish panel.


    B220549



6. REMOVE NO. 1 RADIO BRACKET


    B208395

  1. for 2AD-FTV, 2AD-FHV:
    Remove the 4 screws and No. 1 radio bracket.



    B131479

  1. except 2AD-FTV, 2AD-FHV:
    Remove the 4 screws and No. 1 radio bracket.



7. REMOVE NO. 2 RADIO BRACKET


    B208396

  1. for 2AD-FTV, 2AD-FHV:
    Remove the 4 screws and No. 2 radio bracket.



    B131480

  1. except 2AD-FTV, 2AD-FHV:
    Remove the 4 screws and No. 2 radio bracket.