AMPLIFIER ANTENNA > REMOVAL |
for Preparation Click here
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- w/ Navigation System (for HDD):
- After the ignition switch is turned off, the HDD navigation system requires approximately a minute to record various types of memory and settings. As a result, after turning the ignition switch off, wait a minute or more before disconnecting the cable from the negative (-) battery terminal.
2. REMOVE ROOF HEADLINING ASSEMBLY (for Short Body) |
Remove the roof headlining (Click here).
3. REMOVE ROOF HEADLINING ASSEMBLY (for Long Body) |
Remove the roof headlining (Click here).
4. REMOVE AMPLIFIER ANTENNA ASSEMBLY |
Disconnect the connectors.
Detach the 3 clamps.
Remove the nut.
Detach the 2 claws and remove the amplifier antenna.