GLOW RELAY > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT GLOW PLUG RELAY


A201709E02

  1. Remove the glow plug relay.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    1 - 2
    		Battery voltage not applied to terminals 3 and 4
    		10 kΩ or higher
    1 - 2
    		Battery voltage applied to terminals 3 and 4
    		Below 1 Ω
    If the result is not as specified, replace the glow plug relay.