INJECTOR DRIVER > INSTALLATION

for Preparation Click here



1. INSTALL INJECTOR DRIVER


    A207854

  1. Install the injector driver with the 2 nuts.

    Torque:
    6.5 N*m{ 66 kgf*cm , 58 in.*lbf }


    A207853

  1. Connect the 4 connectors and 2 harness clamps.



2. INSTALL DIFFERENTIAL PRESSURE SENSOR ASSEMBLY


    A206308E01

  1. Connect the 2 vacuum hoses.

    NOTICE:
    Connect the vacuum hoses so that the painted marks of the 2 vacuum hoses are as shown in the illustration.


    A206439

  1. Install the sensor with the nut.

    Torque:
    6.5 N*m{ 66 kgf*cm , 58 in.*lbf }

  1. Connect the sensor connector.