Workshop

HYDRA-MATIC 6L80 (6 Speed)

INTERNAL COMPONENTS (CONT'D)
FINAL ASSEMBLY
16. Install the input sun gear thrust bearing into the
4-5-6 clutch housing in the direction shown in
Figure 160.
17. Install the input carrier thrust washer onto back
side of carrier, as shown in Figure 161, and
retain with a small amount of Trans-Jel®.
18. Install the input planetary carrier and thrust
washer assembly into the ring gear, as shown
in Figure 161, with a rotating motion.
Continued on Page 93
AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
92
Copyright © 2007 ATSGCopyright © 2007 ATSG
52 INPUT PLANETARY CARRIER ASSEMBLY
53 INPUT SUN GEAR
54 INPUT SUN GEAR THRUST BEARING
55 INPUT PLANETARY CARRIER THRUST WASHER
56 COMPLETED 4-5-6 CLUTCH HOUSING ASSEMBLY
52 INPUT PLANETARY CARRIER ASSEMBLY
53 INPUT SUN GEAR
55 INPUT PLANETARY CARRIER THRUST WASHER
52
52
53
53
55
55
56
54
THRUST BEARING
INSTALLED
Figure 160 Figure 161

Leave a Reply

Your email address will not be published. Required fields are marked *