Workshop

HYDRA-MATIC 6L80 (6 Speed)

475
476
477
478
475 4-5-6 CLUTCH HUB ASSEMBLY
476 4-5-6 CLUTCH DAMPENER ASSEMBLY
477 4-5-6 CLUTCH DAMPENER APPLY PLATE
478
477
476
475
475 4-5-6 CLUTCH HUB ASSEMBLY
476 4-5-6 CLUTCH DAMPENER ASSEMBLY
477 4-5-6 CLUTCH DAMPENER APPLY PLATE
AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
53
Copyright © 2007 ATSG
Copyright © 2007 ATSGCopyright © 2007 ATSG
4-5-6 CLUTCH DAMPENER ASSEMBLY
COMPLETED 4-5-6 DAMPENER ASSEMBLY
1. Disassemble the 4-5-6 clutch dampener using
Figure 84 as a guide.
2. Thoroughly clean and inspect all 4-5-6 parts
and dry with compressed air.
3. Install the 4-5-6 dampener into the 4-5-6 clutch
hub in the direction shown in Figure 85, with
smooth side of dampener material facing up.
4. Install the dampener apply plate in the direction
shown in Figure 85.
5. Install the 4-5-6 clutch dampener snap ring, as
shown in Figure 85, and ensure snap ring is
fully seated.
6. Set the 4-5-6 clutch dampener assembly aside
for final assembly (See Figure 86).
Figure 84 Figure 86
Figure 85

Leave a Reply

Your email address will not be published. Required fields are marked *