Workshop

HYDRA-MATIC 6L80 (6 Speed)

AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
52
441 4-5-6 CLUTCH HOUSING ASSEMBLY
442 TURBINE SHAFT SEALING RINGS (SOLID TEFLON)
442
441
Copyright © 2007 ATSG
DT-47768-1
SEAL PROTECTOR
DT-47768-2
SEAL PUSHER
DT-47768-3
SEAL RESIZER
Copyright © 2007 ATSG Copyright © 2007 ATSG
Thickness
1.60-1.70mm (.063" - .067")
2.02-2.12mm (.080" - .083")
2.44-2.54mm (.096" - .100")
Color I.D.
Yellow
Purple
None
Copyright © 2007 ATSG
Figure 80
Figure 81
Figure 82
Figure 83
4-5-6 CLUTCH HOUSING ASSEMBLY (CONT'D)
18. Cut off and discard the three "Teflon" sealing
rings on the turbine shaft (See Figure 82).
19. Install three new turbine shaft sealing rings
as shown in Figure 82, using the installation
tools shown in Figure 81.
20. Adjust the turn screw on the DT-47768-1 and
install the bottom seal ring first.
21. After all three rings are installed, place the
resizing tool over the three seals, as shown in
Figure 83, and set aside for final assembly.
Componet Rebuild
Continued on Page 53

Leave a Reply

Your email address will not be published. Required fields are marked *