Workshop

HYDRA-MATIC 6L80 (6 Speed)

AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
48
Copyright © 2007 ATSG
Figure 73 Figure 75
40. Install the J-46664 pump alignment band and
tighten, as shown in Figure 73.
Note: This is a mandatory tool.
41. Torque the 13 oil pump cover retaining bolts
to 11 Nm (97 in.lb.), as shown in Figure 73,
and using the sequence shown in Figure 74.
42. Remove J-46664 pump alignment band.
43. Place the completed converter housing and oil
pump assembly aside for final assembly.
(See Figure 75).
OIL PUMP ASSEMBLY (CONT'D)
Figure 74
Copyright © 2007 ATSG
TORQUE BOLTS TO:
11 N·M (97 IN.LB.)
J-46664 PUMP COVER
ALIGNMENT TOOL
(MANDATORY TOOL)
J-46664
INSTALLED
COMPLETED OIL PUMP ASSEMBLY

Leave a Reply

Your email address will not be published. Required fields are marked *