Workshop

HYDRA-MATIC 6L80 (6 Speed)

AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
33
Copyright © 2007 ATSG
EXTERNAL PARTS (CONT'D)
12. Do not remove all the valve body assembly
bolts. Remove only the bolts indicated in
Figure 41.
13. Remove the valve body assembly, as shown in
Figure 42.
Note: Use care when handling the valve body
as it also includes the TCM/Solenoid body.
14. Remove and discard the valve body to pump
seals and the valve body to center support seal,
as shown in Figure 42.
15. Set the valve body assembly aside for the
component rebuild section.
Continued on Page 34
Figure 41
Figure 42
B
C
D
E
F
A
24237735
7 73 5 6 1 7 90 22 0 6
F 0 0 H Z 0 G 0 3 2
BOLT
M5 X 70mm
BOLT
M5 X 70mm
1
2
3
3
4
BOLT
M5 X 70mm
ELECTRICAL CONNECTOR
SLIDE LOCK
1 VALVE BODY TO CASE BOLT, M5 X 70mm (6 REQUIRED)
2 VALVE BODY AND TCM/SOLENOID BODY ASSEMBLY
3 VALVE BODY TO PUMP SEALS
4 VALVE BODY TO CENTER SUPPORT SEAL

Leave a Reply

Your email address will not be published. Required fields are marked *