Workshop

HYDRA – MATIC 4L40 – E / 5L40 – E

AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
50
Copyright © 2002 ATSG
GM
83296 022
HYDRAMATIC
STRASBURG
FRANCE
*0139781RVO*
6 66 6
6 66 6
1/8
226
2.1
226
2.1
226
2.1
226
2.1
nat
230
GM
83296 022
HYDRAMATIC
STRASBURG
FRANCE
*0139781RVO*
6 66 6
6 66 6
1/8
226
2.1
226
2.1
226
2.1
226
2.1
nat
230 CONVERTER HOUSING TO MAIN CASE "O" RING SEAL
ENSURE THAT SEAL
IS FULLY SEATED
COMPONENT REBUILD (CONT'D)
OIL PUMP ASSEMBLY (CONT'D)
35. Install converter housing to case "O" ring seal,
as shown in Figure 70, and ensure that it is
fully seated.
36. Install new converter seal onto the installation
tool J-44766, align the converter seal with the
bolt holes, and then install the converter seal in
the housing (See Figure 71).
37. Install the two seal retaining bolts and torque
to 3.6 Nm (31 in.lb.), as shown in Figure 72.
38. Set the completed converter housing and pump
assembly aside for the final assembly process.
Figure 70 Figure 71
228 TORQUE CONVERTER SEAL RETAINING BOLTS (2 REQUIRED)
229 TORQUE CONVERTER METAL CLAD SEAL ASSEMBLY
Copyright © 2002 ATSG
228
J-44766
SEAL INSTALLER
229

Leave a Reply

Your email address will not be published. Required fields are marked *