Workshop

HYDRA – MATIC 4L40 – E / 5L40 – E

AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
37
Copyright © 2002 ATSG
6
7
Copyright © 2002 ATSG
Forward And Reverse Drums
Removed As An Assembly
6 DIRECT AND REVERSE CLUTCH HOUSING ASSEMBLY
7 FORWARD AND COAST CLUTCH HOUSING ASSEMBLY
Figure 45 Figure 46
33. Remove the 7 bell housing to case retaining
bolts, as shown in Figure 44.
34. Remove bell housing and oil pump assembly,
as shown in Figure 44 and set aside for the
component rebuild process.
35. Remove and discard the bell housing to case
seal and the pump cover to case gasket, as
shown in Figure 44.
36. Remove the forward clutch housing and reverse
clutch housing as an assembly by grasping the
turbine shaft and lifting straight up, as shown
in Figure 45.
37. Seperate the reverse clutch housing from the
forward clutch housing, as shown in Figure 46,
and set aside for component rebuild process.
INTERNAL COMPONENTS
TRANSMISSION DISASSEMBLY (CONT'D)
Continued on Page 38

Leave a Reply

Your email address will not be published. Required fields are marked *