Workshop

HYDRA – MATIC 4L40 – E / 5L40 – E

Copyright © 2002 ATSG
1
3
1 TORQUE CONVERTER ASSEMBLY
3 TRANSMISSION ASSEMBLY
AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
27
Copyright © 2002 ATSG
Figure 25 Figure 27
Figure 26
TRANSMISSION DISASSEMBLY
EXTERNAL COMPONENTS
GM
HYDRAMATIC
STRASBOURG
FRANCE
HYDRAMATIC
STRASBOURG
FRANCE
*0139781RVO**0139781RVO*
96 02296 022
832
1
8/12/99
01997
1
18
:54
142387
5
P08
013
99781
96022832
VO
GMGM
TECKPAK
FITZ-ALL
Copyright © 2002 ATSG
HOLDING FIXTURE
J-8763-02
1. Install transmission Holding Fixture J-8763-02
or equivalent that will allow you to mount the
transmission in a bench fixture and rotate it to
a desired position for disassembly, as shown in
Figure 25.
2. Remove the torque converter assembly from
transmission as shown in Figure 26, by pulling
straight out and rotating until dis-engaged from
the transmission.
Caution: The Torque Converter weighs
approximately 26 pounds.
3. Remove and discard the "O" ring from turbine
shaft, as shown in Figure 27, using a small
screwdriver.
Continued on Page 28

Leave a Reply

Your email address will not be published. Required fields are marked *