Workshop

FORD 5R55S/5R55W

AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
83
Figure 144
INPUT SUN SHELL
AND SUN GEAR
"TALL"
LOW/REVERSE
SPACER
Copyright © 2004 ATSG
rF
o
d
X
4
W
P
F
R
4
E
A
1
D
D
0
5
5
-
C
A
FORWARD CLUTCH
THRUST WASHER
(NO. 6B)
FORWARD PLANET
THRUST BEARING
(NO. 7)
FORWARD PLANET
ASSEMBLY
FORWARD RING
GEAR AND HUB
Figure 145
Copyright © 2004 ATSG
INTERNAL COMPONENTS (Cont'd)
Continued on Page 84
20. Install the "Tall" low/reverse spacer on top of
the No. 8 thrust bearing, in the direction shown
in Figure 144.
21. Install the input sun gear and shell assembly,
as shown in Figure 144.
22. Install the forward planetary carrier with the
No. 6 thrust washer, as shown in Figure 145,
by rotating into position.
Caution: Ensure that snapped in thrust
washer is still in position.
23. Install forward planetary carrier thrust bearing
(No. 7) in the direction shown in Figure 145,
and retain with small amount of Trans-Jel®.
24. Install the forward ring gear and hub, as shown
in Figure 145, by rotating into position.
25. Install forward clutch thrust washer (No. 6B),
as shown in Figure 145.

Leave a Reply

Your email address will not be published. Required fields are marked *