Workshop

FORD 5R55S/5R55W

1L
P
7A 3 A2 - 0 9-B
rdFo
5. Install the preassembled 4WD adapter housing
ensuring that the parking pawl is engaged on
the park rod properly (See Figure 137).
6. Install the seven 4WD adapter housing bolts
and torque bolts to 39 N•m (29 ft.lb.), as shown
in Figure 138.
7. Install the temporary holding strap, as shown in
Figure 139, to retain the output shaft in the
transmission intill snap ring is installed.
Copyright © 2004 ATSG
1
L P A 3 A2 -7
0 9-B
d
For
Figure 137
RETAINING BOLTS
(7 REQUIRED)
4WD ADAPTER
HOUSING
AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
80
Continued on Page 81
INTERNAL COMPONENTS (Cont'd)
P1L 7A039 BA2 - -
Frd
o
Copyright © 2004 ATSG
Figure 139
CAUTION: INSTALL TEMPORARY
HOLDING STRAP AS SHOWN TO
RETAIN OUTPUT SHAFT.
Copyright © 2004 ATSG
Figure 138

Leave a Reply

Your email address will not be published. Required fields are marked *