Workshop

FORD 5R55S/5R55W

AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
79
Continued on Page 80
FINAL TRANSMISSION ASSEMBLY
INTERNAL COMPONENTS
1. Rotate transmission in fixture so that rear of the
case is facing up, as shown in Figure 135.
2. Ensure that the number 11 thrust washer is still
in place, as shown in Figure 135.
3. Install the park gear and output shaft, as shown
in Figure 135.
4. Install the extension housing gasket, as shown
in Figure 136, and retain with a small amount
of Trans-Jel®.
NUMBER ELEVEN
THRUST WASHER
PARK GEAR
Copyright © 2004 ATSG
Figure 135
OUTPUT SHAFT
(4WD VERSION SHOWN)
Copyright © 2004 ATSG
Figure 136
EXTENSION
GASKET

Leave a Reply

Your email address will not be published. Required fields are marked *