Workshop

FORD 5R55S/5R55W

AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
60
Figure 102 Figure 104
Figure 103
Copyright © 2004 ATSG Copyright © 2004 ATSG
Copyright © 2004 ATSG
FRONT PLANETARY
CARRIER THRUST WASHER
COMPLETED REAR PLANETARY
CARRIER ASSEMBLY
COMPLETED FRONT PLANETARY
CARRIER ASSEMBLY
FRONT PLANETARY CARRIER ASSEMBLY
REAR PLANETARY CARRIER ASSEMBLY
1. Inspect the front planetary carrier carefully for
any wear and/or damage (See Figure 102).
2. Inspect the rear planetary carrier thrust bearing
that is "Trapped" inside the planetary gears,
for any wear and/or damage.
3. Inspect the front planetary carrier thrust washer
for any wear and/or damage (See Figure 102).
4. Replace the thrust washer as necessary.
5. Install the front planetary carrier thrust washer
by "Snapping" the tabs into place, as shown in
Figure 102.
6. Set completed front planetary carrier assembly
aside for the final assembly process. Refer to
Figure 103.
1. Inspect the rear planetary carrier carefully for
any wear and/or damage (See Figure 104).
2. Set completed rear planetary carrier assembly
aside for the final assembly process. Refer to
Figure 104.
FRONT PLANETARY
CARRIER ASSEMBLY

Leave a Reply

Your email address will not be published. Required fields are marked *