Workshop

FORD 5R55S/5R55W

AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
44
Figure 68Figure 67
Copyright © 2004 ATSG
COAST
CLUTCH
PISTON
COAST CLUTCH
PISTON ASSEMBLY
COAST CLUTCH
PISTON INNER
LIP SEAL
COAST CLUTCH
PISTON OUTER
LIP SEAL
COAST CLUTCH
HOUSING
COAST CLUTCH
HOUSING
COAST CLUTCH ASSEMBLY (Cont'd)
5. Install a new inner lip seal into the groove in the
coast clutch piston, with the lip facing down, as
shown in Figure 67.
6. Install a new outer lip seal into the groove in the
coast clutch piston, with the lip facing down, as
shown in Figure 67.
7. Lubricate both inner and outer lip seals with a
small amount of Trans-Jel®.
8. Lubricate both the inner and outer seal surfaces
in coast clutch housing with a small amount of
Trans-Jel®.
9. Install the completed coast clutch piston into the
overrun clutch housing with twisting motion, as
shown in Figure 68.
Copyright © 2004 ATSG
8
8
Continued on Page 45

Leave a Reply

Your email address will not be published. Required fields are marked *