Workshop

FORD 5R55S/5R55W

AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
43
7. COAST CLUTCH RETURN SPRINGS (20 REQUIRED).
8. COAST CLUTCH PISTON.
9. COAST CLUTCH INNER LIP SEAL.
10. COAST CLUTCH OUTER LIP SEAL.
11. COAST CLUTCH HOUSING.
Figure 66
COAST CLUTCH ASSEMBLY
COAST CLUTCH EXPLODED VIEW
1. Disassemble the coast clutch assembly using
the illustrations in Figure 66 as a guide.
2. Remove and discard the coast clutch lip seals,
as shown in Figure 66.
3. Inspect all coast clutch parts thoroughly for any
wear and/or damage.
4. Clean all coast clutch parts thoroughly and dry
with compressed air.
Continued on Page 44
8
Thickness = .065"
Width = .155"
1 2
3
4
5 6
7
8
9
10
11
1. COAST CLUTCH BACKING PLATE SNAP RING.
2. COAST CLUTCH BACKING PLATE.
3. COAST CLUTCH FRICTION PLATES.
4. COAST CLUTCH STEEL PLATES.
5. COAST CLUTCH SPRING RETAINER SNAP RING.
6. COAST CLUTCH RETURN SPRING RETAINER.
Copyright © 2004 ATSG

Leave a Reply

Your email address will not be published. Required fields are marked *