Workshop

FORD 5R55S/5R55W

AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
36
Copyright © 2004 ATSG
Figure 51
REVERSE DRUM
AND LOW SPRAG
ASSEMBLY
LOW/REVERSE
BAND ASSEMBLY
REAR PLANETARY
RING GEAR THRUST
BEARING (NO. 10)
INTERNAL COMPONENTS (Cont'd)
55. Remove and tag for identification, the rear ring
gear (No. 9) thrust bearing (See Figure 50).
56. Remove the rear planetary ring gear from the
transmission, as shown in Figure 50.
57. Remove reverse drum and low sprag assembly
by rotating and lifting drum out, as shown in
Figure 51.
58. Remove and tag for I.D. the rear planetary gear
thrust bearing (No. 10), as shown in Figure 51.
59. Remove the low/reverse band assembly from
the case, as shown in Figure 51.
60. Rotate the transmission so that output shaft is
facing up, as shown in Figure 52.
Copyright © 2004 ATSG
Figure 50
REAR PLANETARY
RING GEAR THRUST
BEARING (NO. 9)
REAR PLANETARY
RING GEAR
Continued on Page 37

Leave a Reply

Your email address will not be published. Required fields are marked *