Workshop

FORD 5R55S/5R55W

AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
31
Copyright © 2004 ATSG
29. Using the special pump rmoval tool and your
slide hammer, remove the oil pump assembly,
as shown in Figure 36.
30. Set the oil pump assembly aside for component
rebuild section in this manual.
31. Remove the OD/Coast clutch drum assembly,
as shown in Figure 37, and set drum aside for
the component rebuild section.
32. Remove the overdrive band assembly and both
band struts, as shown in Figure 38.
Note: Notice the difference in the band struts
and which side they are located, as shown in
Figure 38.
33. Remove the coast clutch drum adapter and the
overdrive sun gear from the overdrive carrier,
as shown in Figure 39.
INTERNAL COMPONENTS (Cont'd)
Continued on Page 32
COAST CLUTCH
DRUM ASSEMBLY
X
W
9
9
4
/
P
1
0
-
7
/
L
9
0
6
6
-
9
A
B
Copyright © 2004 ATSG
OVERDRIVE
BAND
BAND STRUT
ADJUST SIDE
BAND STRUT
SERVO SIDE
Figure 38
Figure 37
Figure 39
COAST CLUTCH
DRUM ADAPTER
OVERDRIVE
SUN GEAR
Copyright © 2004 ATSG
7
6
6
-
0
P
-
4
A
W
A
X
4
X
4
A
B

Leave a Reply

Your email address will not be published. Required fields are marked *