Workshop

FORD 5R55S/5R55W

AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
24
Copyright © 2004 ATSG
LU
N T A
E
R
LU
N T A
E
R
00610061
1L2P-7F293-AA1L2P-7F293-AA
TRANSMISSION DISASSEMBLY
EXTERNAL COMPONENTS
Copyright © 2004 ATSG
1. Remove the turbine shaft from the transmission
as shown in Figure 23. Inspect the spline area
on both ends and set aside for final assembly.
2. Remove the Turbine Shaft Sensor (TSS), the
Intermediate Shaft Sensor (ISS) and the Output
Shaft Sensor (OSS) from the transmission case,
using a 30 Torx bit for the retaining bolts.
(See Figure 23).
3. The Turbine and Output sensors are exactly the
same part number. Refer to Figure 24 for the
differences between them, and the Intermediate
shaft speed sensor.
4. Remove and discard the "O" ring seals from all
three speed sensors, and use the chart found in
Figure 13 to ohms check the sensors for proper
resistance readings.
Turbine And Output
Shaft Speed Sensor
Intermediate Shaft
Speed Sensor
Figure 24
Continued on Page 25
Ford
XW4P-7H
103 AA
XW4P-7M
103 AA
Turbine Shaft
Speed Sensor
Output Shaft
Speed Sensor
Intermediate Shaft
Speed Sensor
Figure 23

Leave a Reply

Your email address will not be published. Required fields are marked *