Workshop

FORD 5R55S/5R55W

P
-2L2 D
A
-
R
J
B L
B
-
J L
R
0 3
4
0
1
6
6
0
4
1
3
0
- 7
B
D
1C9
AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
21
Copyright © 2004 ATSG
Pressure Control Solenoid "C"
Pressure Tap
Copyright © 2004 ATSG
Fo dr
Line Pressure Tap
(Pressure Control Solenoids "A" And "B")
Vehicle/Engine
Explorer/Mountaineer,
4.0L Engine
Explorer/Mountaineer,
4.6L Engine
Range
P/N
P/N
(D), 3, 2, 1
(D), 3, 2, 1
Reverse
Reverse
90-120 psi
90-120 psi
90-120 psi
0-15 psi
0-15 psi
0-15 psi
0-15 psi
90-120 psi
90-120 psi
112-134 psi
112-134 psi
0-15 psi
0-15 psi
100-140 psi
90-110 psi
80-110 psi
282-380 psi
282-380 psi
228-263 psi
228-263 psi
Idle
Line Pres.
WOT
PC "C" Pres.
Idle
PC "C" Pres.
WOT
Line Pres.
LINE PRESSURE TEST
Figure 17 Figure 18
Figure 19
1. There are 3 Pressure Control solenoids located
in the solenoid body, PC "A", PC "B", PC "C",
used to control all application pressures.
2. Start engine and check line pressures using the
chart provided below to determine if the line
pressure is within specifications.
Special Note: The line pressure tap in Figure 17, is
used to verify output pressure from PC "A" or from
PC "B", by turning either one OFF while verifying
pressure from the other solenoid.
The 2nd pressure tap in Figure 18, is used to verify
pressure readings from PC "C" solenoid. Use the
chart below for proper specifications.

Leave a Reply

Your email address will not be published. Required fields are marked *