Workshop

FORD 5R55S/5R55W

AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
100
Copyright © 2004 ATSG
P1L 7A039 BA2 - -
dFor
TEMPORARY
BRACKET
Figure 177 Figure 178
TWO WHEEL DRIVE ASSEMBLY
1. Inspect and replace extension housing bushing
as necessary using the proper removal tool and
bushing driver (See Figure 178).
2. Install a new extension housing yoke seal, as
shown in Figure 178, using the proper driver.
3. Install a new extension housing gasket onto
the case, as shown in Figure 179.
4. Install the completed extension housing onto
the transmission, as shown in Figure 179.
5. Install the seven extension housing bolts, as
shown in Figure 179.
Note: The extension housing bolts for the
2WD version are longer than the 4WD
adapter housing bolts (See Figure 180).
6. Torque the extension housing bolts down to
26 N•m (19 ft.lb.), as shown in Figure 181.
Continued on Page 102
1 P A03 -L2 -
7
8 A
B
®
o
rdF
Copyright © 2004 ATSG
EXTENSION
HOUSING SEAL
EXTENSION
HOUSING
2WD MODELS
EXTENSION
HOUSING
BUSHING

Leave a Reply

Your email address will not be published. Required fields are marked *