Workshop

FORD 5R55N

AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
32
Copyright © 2001 ATSG
EXTERNAL COMPONENTS (Cont'd)
24. Remove the retaining bolt for the detent spring
and remove detent spring (See Figure 33).
Note the length of this bolt.
25. Remove the valve body retaining bolt directly
in front of the detent spring (See Figure 33).
Note the length of this bolt.
26. Remove the remaining 7 valve body retaining
bolts, as shown in Figure 33.
27. Remove the complete valve body and spacer
plate assembly and set aside for the component
rebuild section (See Figure 33).
28. Remove the intermediate clutch seal retaining
spring, remove and discard the intermediate
clutch seal, as shown in Figure 34.
29. Caution: "Do Not" yet remove the center
support bolt, as nut may fall into unit.
Figure 33
Continued on Page 33
Ford
GAS
6540
R3 19 A
6538
R3 T9 A
DA 8
Ford
VALVE BODY
RETAINING BOLTS
(45mm LENGTH)
VALVE BODY
RETAINING BOLT
(27mm LENGTH)
VALVE BODY
RETAINING BOLTS
(45mm LENGTH)
DETENT
SPRING
DETENT SPRING
BOLT (30mm LONG)
VALVE BODY
ASSEMBLY

Leave a Reply

Your email address will not be published. Required fields are marked *