Workshop

FORD 5R55N

AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
28
Copyright © 2001 ATSG
EXTERNAL COMPONENTS (Cont'd)
16. Remove the two filter retaining bolts using an
8mm socket as shown in Figure 29.
17. Discard the oil filter and seals (See Figure 29).
18. Remove the two reverse pressure switch bolts,
disconnect the switch from solenoid assembly
and remove reverse pressure switch, as shown
in Figure 30.
19. Remove the four retaining bolts from reverse
servo assembly using an 8mm socket and
remove the reverse servo assembly, as shown
in Figure 30.
Note: Ford Motor Co. recommends discarding
this switch and replacing on every rebuild.
Figure 29
Continued on Page 30
Ford
GAS
6540
R3 19 A
6538
R3 T9 A
DA 8
Ford
OIL FILTER
RETAINING BOLTS
(82mm LENGTH)
OIL FILTER
AND SEALS
REVERSE PRESSURE
SWITCH

Leave a Reply

Your email address will not be published. Required fields are marked *