Workshop

FORD 5R55N

AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
109
Continued on Page 110
Figure 186
Ford
XW4P-7H
103 AA
XW4P-7M
103 AA
Turbine And Output
Shaft Speed Sensor
Intermediate Shaft
Speed Sensor
Copyright © 2001 ATSG
Ford
Line Pressure Tap
(Pressure Control Solenoids "A" And "B")
Figure 187
Copyright © 2001 ATSG
X
W
4
P-
AC
RJL
-
B
RJ
L
-B
0
043
6
1
0
0
436
1
B
D
-9
C
1
7
Pressure Control Solenoid "C"
Pressure Tap
Figure 188
EXTERNAL COMPONENTS
4. Install a new "O" ring on turbine speed sensor
and install into case in the location, as shown in
Figure 185.
Note: Use Figure 186 to identify the three
speed sensor assemblies, and use the chart
on Page 17 for proper Ohms readings.
5. Install a new "O" ring on the intermediate shaft
speed sensor and install into case in the location
shown in Figure 185.
Note: Use Figure 186 to identify the three
speed sensor assemblies, and use the chart
on Page 17 for proper Ohms readings.
6. Install a new "O" ring on output shaft speed
sensor and install in case in the location shown
in Figure 185.
Note: Use Figure 186 to identify the three
speed sensor assemblies, and use the chart
on Page 17 for proper Ohms readings.
7. Torque all three speed sensor retaining bolts
to 10 Nm (89 in.lb.).
8. Check and ensure that both oil pressure plugs
are tight, as shown in Figures 187 and 188.

Leave a Reply

Your email address will not be published. Required fields are marked *