Workshop

FORD 5R110W TorqShift

AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
97
Copyright © 2004 ATSG
Copyright © 2004 ATSG
S
ID
E
S
I
U
H
P
T
S
ID
E
S
I
U
H
P
T
S
ID
E
S
I
U
H
P
T
Has "Dimple" On
One Tooth For I.D.
1ST DESIGN LOW DIODE
2ND DESIGN LOW DIODE
Figure 162
Figure 161
LOW ONE WAY CLUTCH DIODE ASSEMBLY
COMPONENT REBUILD
LOW DIODE INNER RACE
SHOULD FREEWHEEL CLOCKWISE
AND LOCK COUNTER-CLOCKWISE
WHILE HOLDING OUTER RACE
1. The low diode assembly received a material
change on all pieces of the diode assembly and
a small "Dimple" was added to one tooth of the
inner race for identification (See Figure 162).
Note: "Do Not" install any low diode that
does not have the dimple on one tooth.
2. Check the low diode for proper operation, as
shown in Figure 161.
Note: Low diode inner race should freewheel
Clockwise and lock Counter-Clockwise while
holding the outer race.
3. Set the low diode assembly aside for the final
assembly process.
S
ID
E
S
I
U
H
P
T
OEM PART NUMBER
3C3Z-7A089-AB

Leave a Reply

Your email address will not be published. Required fields are marked *