AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
Copyright © 2004 ATSG
SUN GEAR AND
Ensure Number 12
Bearing Is In Place
Figure 147 Figure 148
DRUM AND SUN GEAR SHELL ASSEMBLY (CONT'D)
Continued on Page 92
5. Install the completed forward planetary carrier,
as shown in Figure 147, by rotating into the
ring gear until fully seated.
Note: Ensure that number 11 bearing is still
in place before installing carrier.
6. Install the proper sun gear and shell assembly,
as shown in Figure 148, by rotating back and
forth until fully seated.
Note: Ensure that number 12 thrust bearing
is in place, as shown in Figure 148, before
installing sun shell.