Workshop

FORD 5R110W TorqShift

AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
89
Copyright © 2004 ATSG
SUN SHELL DIFFERENCES
SUN SHELL DIFFERENCES
COMPONENT REBUILD
SNAP RING
VISABLE
SNAP RING
NOT VISABLE
LARGER DIAMETER
55 TOOTH SUN GEAR
APPROX.
1/8" TALLER
THAN 2004
MODELS
SMALLER DIAMETER
42 TOOTH SUN GEAR
2003/2004 MODELS 2005/UP MODELS
NOTICE: The sun gear and shell also changed at
the start of production for 2005 models so that it
would be compatable with the new forward carrier
and the visual differences are as follows.
1. Looking at the front of the sun shell assembly
it is obvious that the sun gear is larger, and
tooth count has been increased to 55 teeth, as
shown in Figure 144.
2. Looking at the back of the sun shell assembly
you cannot see the retaining snap ring and
the bearing support that is pressed onto the
sun gear is different configuration, as shown
in Figure 144.
3. Setting side by side the 2005 version of the
sun shell assembly is approximately 1/8"
taller than the 2004 version, as shown in
Figure 144.
Figure 144

Leave a Reply

Your email address will not be published. Required fields are marked *