Workshop

FORD 5R110W TorqShift

4. Ensure that you have the proper parts for the
model that you are rebuilding.
5. Check forward planetary carrier pinion end
play, as shown in Figure 139, and replace the
planetary carrier as necessary.
6. If removed, install the proper forward planetary
lube dam, as shown in Figure 140, and ensure
that all tabs are snapped into position.
7. Install the number 12 thrust bearing into the
forward planetary carrier, in the direction that
is shown in Figure 140.
Note: The number 12 thrust bearing is the
same on both models, did not change.
FORWARD PLANETARY SYSTEM (CONT'D)
COMPONENT REBUILD
Continued on Page 87
AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
86
Copyright © 2004 ATSG
Copyright © 2004 ATSG
NUMBER 12
THRUST BEARING
NUMBER 12
THRUST BEARING
LUBE DAM
(6 TAB)
LUBE DAM
(4 TAB)
FORWARD
PLANETARY
CARRIER
FORWARD
PLANETARY
CARRIER
2003/2004 MODELS 2005/UP MODELS
Figure 140
Figure 139
If Planetary Pinion End Play
Exceeds .030", Replace
Planetary Carrier

Leave a Reply

Your email address will not be published. Required fields are marked *