Workshop

FORD 5R110W TorqShift

7. Install direct clutch piston "Bellville" return
spring on top of the direct clutch piston in the
direction shown in Figure 134.
8. Lubricate the seal and install the direct clutch
balance piston, as shown in Figure 134.
9. Compress the return spring and balance piston
and install snap ring (See Figure 134).
10. Install 4 steel plates and 4 friction plates in the
order shown in Figure 135.
11. Install the direct clutch backing plate and the
selective snap ring, as shown in Figure 135.
AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
83
Copyright © 2004 ATSGCopyright © 2004 ATSG
DIRECT CLUTCH HOUSING (CONT'D)
Continued on Page 84
54
55
56
49
57
49 DIRECT CLUTCH HOUSING ASSEMBLY
54 DIRECT CLUTCH FRICTION PLATES (4)
55 DIRECT CLUTCH STEEL PLATES (4)
56 DIRECT CLUTCH BACKING PLATE
57 DIRECT CLUTCH BACKING PLATE SNAP RING (SELECTIVE)
51
52
53
49 DIRECT CLUTCH HOUSING ASSEMBLY
51 DIRECT CLUTCH PISTON "BELLVILLE" RETURN SPRING
52 DIRECT CLUTCH BALANCE PISTON
53 DIRECT CLUTCH BALANCE PISTON SNAP RING
49
Figure 134 Figure 135

Leave a Reply

Your email address will not be published. Required fields are marked *