Workshop

FORD 5R110W TorqShift

63 FORWARD CLUTCH "BELLVILLE" RETURN SPRING
64 FORWARD CLUTCH BALANCE PISTON
65 FORWARD CLUTCH RETURN SPRING SNAP RING
63
64
65
FORWARD CLUTCH HOUSING (CONT'D)
7. Install forward clutch piston return "Bellville"
spring on top of the forward clutch piston in
the direction shown in Figure 124.
8. Lubricate the seal and install the forward clutch
balance piston, as shown in Figure 124.
9. Compress the return spring and balance piston
and install snap ring (See Figure 124).
Note: This operation requires hydraulic press.
10. Install the forward clutch "Wave" plate, as
shown in Figure 125.
11. Install 4 steel plates and 4 friction plates for the
model you're building, as shown in Figure 125.
Continued on Page 79
AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
78
Copyright © 2004 ATSG
55 FORWARD CLUTCH STEEL PLATES (4)
56 FORWARD CLUTCH BACKING PLATE
61 FORWARD CLUTCH HOUSING ASSEMBLY
66 FORWARD CLUTCH "WAVE" PLATE
67 FORWARD CLUTCH FRICTION PLATES
68 FORWARD CLUTCH BACKING PLATE SNAP RING (SELECTIVE)
61
66
56
68
67
55
Copyright © 2004 ATSG
Figure 124 Figure 125
12. Install the forward clutch backing plate and the
selective snap ring, as shown in Figure 125.
Note: Flat side of backing plate faces up.

Leave a Reply

Your email address will not be published. Required fields are marked *