Workshop

FORD 5R110W TorqShift

AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
77
Copyright © 2004 ATSG
Copyright © 2004 ATSG
FORWARD CLUTCH HOUSING
2003-2004 Models 2005-Up Models
Figure 122
Figure 123
Larger
Lube
Holes
61 FORWARD CLUTCH HOUSING ASSEMBLY
62 FORWARD CLUTCH APPLY PISTON
61
62
COMPONENT REBUILD
FORWARD CLUTCH HOUSING (CONT'D)
4. Place the forward clutch housing on flat work
surface, as shown in Figure 123.
Note: Ensure that you have all of the correct
forward clutch parts for the model that you
are rebuilding, using the descriptions found
in "Forward Clutch Differences".
5. Lubricate both inner and outer seal surfaces on
forward clutch piston with Trans-Jel®.
6. Install the forward clutch piston into forward
clutch housing, as show in Figure 123, using
a slight twisting motion.
Continued on Page 78

Leave a Reply

Your email address will not be published. Required fields are marked *