Workshop

FORD 5R110W TorqShift

Copyright © 2004 ATSG
FORWARD CLUTCH INTERNAL RING GEAR
2003-2004 Models 2005-Up Models
Copyright © 2004 ATSG
FORWARD CLUTCH BACKING PLATE
2003-2004 Models 2005-Up Models
AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
76
FORWARD CLUTCH HOUSING DIFFERENCES (CONT'D)
NOTICE: Continued from Page 75:
3. Increased inside and pilot diameters of the
forward clutch backing plate, as shown in
Figure 120.
4. Forward clutch internal ring gear increases
in diameter, and the tooth count changes to
accommodate the new friction plates, as
shown in Figure 121.
5. The number 9 thrust washer changes to
accommodate the new ring gear, as shown in
Figure 121.
6. The forward clutch housing also changes
with increased diameter lube holes in the hub
for the direct clutch plates (See Figure 122).
Figure 120
Figure 121
Larger Inside
Diameter
Larger
Diameter
Approx.
5.372"
Approx.
5.117"
NUMBER 9
THRUST WASHER
NUMBER 9
THRUST WASHER
Approx.
6.372"
Pilot
Diameter
Pilot
Diameter
Approx.
6.250"

Leave a Reply

Your email address will not be published. Required fields are marked *