Workshop

FORD 5R110W TorqShift

AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
55
Copyright © 2004 ATSG
Copyright © 2004 ATSG
"COMPLETED"
SOLENOID BODY AND
CHANNEL PLATE
ASSEMBLY
Figure 80
If it becomes necessary to replace the internal wire harness and/or the entire solenoid body on a 5R110W
Torqshift transmission, please be aware of the following:
1. You may have to install a new service harness, without pressure switch connectors, into a unit with the
pressure switches in the solenoid body. (See Figure 74 for locations)
2. You may have to install a new service solenoid body, without pressure switches, into a unit that has the
original internal harness with pressure switch connectors. (See Figure 74 for locations)
Note: These are both acceptable repairs and will not affect the function or operation of the transmission.
Use of the pressure switch input was dropped from the vehicle calibration before the 2003 model
year went into production.
INTERNAL HARNESS OR SOLENOID BODY SERVICE

Leave a Reply

Your email address will not be published. Required fields are marked *