Workshop

FORD 5R110W TorqShift

AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
44
Copyright © 2004 ATSG
EXTERNAL MANUAL
SHIFT LEVER
CASE
RETAINING
PIN
SENSOR
RETAINING
PIN
Copyright © 2004 ATSG
RETAINING BOLTS
(2 REQUIRED)
TRANSMISSION
RANGE SENSOR
ASSEMBLY
COMPONENT REBUILD
TRANSMISSION CASE (Cont'd)
11. Rotate the case with pan surface facing up and
install the park rod, inside detent lever and the
transmission range sensor (See Figure 57).
12. Install the two range sensor retaining bolts, but
do not tighten.
13. Install the external manual shift lever through
the case and into the range sensor, as shown in
Figure 58, and install case retaining pin.
14. Rotate the shift lever to align with hole in the
range sensor and install new sensor retaining
pin, as shown in Figure 59.
Note: Leave 1/16 inch of pin exposed.
Continued on Page 45
Figure 57
Figure 58
Figure 59

Leave a Reply

Your email address will not be published. Required fields are marked *