Workshop

FORD 5R110W TorqShift

AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
37
Copyright © 2004 ATSGCopyright © 2004 ATSG
TRANSMISSION DISASSEMBLY
INTERNAL COMPONENTS (CONT'D)
40. Remove the intermediate clutch plates and the
intermediate clutch backing plate, as shown in
Figure 43.
41. Remove the direct clutch housing assembly, as
shown in Figure 44, and set housing aside for
the component rebuild section.
42. Remove the forward clutch housing assembly,
as shown in Figure 44, and set housing aside
for the component rebuild section.
43. The number 7 thrust washer and the number 8
thrust bearing should remain with the forward
clutch housing.
Continued on Page 38
46 INTERMEDIATE CLUTCH FRICTION PLATES
47 INTERMEDIATE CLUTCH STEEL PLATES
48 INTERMEDIATE CLUTCH BACKING PLATE
49 DIRECT CLUTCH HOUSING, COMPLETE
58 NUMBER 7 THRUST WASHER
59 NUMBER 8 THRUST BEARING
61 FORWARD CLUTCH HOUSING, COMPLETE
46
47
48
61
58
59
49
Figure 43 Figure 44

Leave a Reply

Your email address will not be published. Required fields are marked *