Workshop

FORD 5R110W TorqShift

AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
34
Copyright © 2004 ATSG
TRANSMISSION DISASSEMBLY
INTERNAL COMPONENTS (CONT'D)
22. Remove and discard the two support feed bolts,
as shown in Figure 38.
Note: The feed bolts will not retain torque
specification if they are reused.
23. Rotate transmission in fixture so that the bell
housing is facing up, as shown in Figure 39.
24. Remove the nine oil pump to case retaining
bolts, as shown in Figure 39.
25. Remove the oil pump assembly using slide
hammer as necessary (See Figure 39).
26. Remove and discard oil pump to case gasket,
as shown in Figure 39.
Continued on Page 35
Figure 38 Figure 39
INTERMEDIATE AND FORWARD
CLUTCH FEED BOLTS
11
8
10
13
7
KXV
9.8
3C3R3C3R
3C3R3C3R
0701C0701C
0701C0701C
KXV
9.8
KXV
9.8
KXV
9.8
KXV
9.8
KXV
9.8
KXV
9.8
KXV
9.8
KXV
9.8
7 OIL PUMP TO CASE RETAINING BOLTS (9 REQUIRED).
8 OIL PUMP ASSEMBLY.
10 PUMP TO COAST CLUTCH DRUM (NO 1) THRUST WASHER.
11 OIL PUMP TO CASE GASKET.
13 PUMP SUPPORT TO COAST CLUTCH (NO 2) THRUST BEARING.
Copyright © 2004 ATSG

Leave a Reply

Your email address will not be published. Required fields are marked *