Workshop

FORD 5R110W TorqShift

AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
31
Copyright © 2004 ATSG
SOLENOID BODY AND
CHANNEL PLATE
ASSEMBLY
SOLENOID BODY
TO CASE (67.5MM)
(13 REQUIRED)
SOLENOID BODY
TO CASE (42 MM)
(3 REQUIRED)
REINFORCING PLATE
TO CASE (30 MM)
(5 REQUIRED)
TRANSMISSION DISASSEMBLY
INTERNAL COMPONENTS (CONT'D)
14. Remove only the valve body bolts not shaded
in Figure 33, which are the bolts that retain the
valve body to the case, as shown in Figure 34.
15. Remove the valve body from the case using a
slight twisting motion to remove the main case
connector from the case bore (See Figure 34).
16. Set the complete valve body and channel plate
assembly aside for component rebuild section.
Continued on Page 32
Figure 34

Leave a Reply

Your email address will not be published. Required fields are marked *