Workshop

FORD 5R110W TorqShift

FordFord
AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
27
Copyright © 2004 ATSG
Copyright © 2004 ATSG
RETAINING
BOLT
"O" RING
TURBINE/INTERMEDIATE
SHAFT SPEED SENSOR
Figure 28
(1)
(2)
(3)
(4)
Turbine Shaft And
Intermediate Shaft
Speed Sensor
Gray/Orange
Green/White
Pink/White
Black/White
View Looking Into
Turbine Shaft And
Intermediate Shaft Speed
Sensor Connector
TSS Sig
Grnd
Ref Volt
ISS Sig
Output Shaft
Speed Sensor
(TSS) Terminals 1 and 3 = 325-485 Ohms @ 70°F
(OSS) Terminals 1 and 2 = 325-485 Ohms @ 70°F
(ISS) Terminals 1 and 4 = 325-485 Ohms @ 70°F
Pink/White
(1)
(2)
(3)
Black/White
Blue/Yellow
View Looking Into
Output Shaft Speed
Sensor Connector
Grnd
Ref Volt
OSS Sig
Turbine Shaft Speed (TSS) Sensor and
Intermediate Shaft Speed (ISS) Sensor
Output Shaft Speed (OSS) Sensor
Figure 30
Figure 29
TRANSMISSION DISASSEMBLY
EXTERNAL COMPONENTS
5. Remove the turbine shaft/intermediate shaft
speed sensor from the transmission case, as
shown in Figure 28.
6. Remove and discard the turbine/intermediate
speed sensor "O" ring, as shown in Figure 28.
7. Check both speed sensors for the proper ohms
readings using Figure 29 and 30.
8. Replace the speed sensors as necessary.
Continued on Page 28
Copyright © 2004 ATSG

Leave a Reply

Your email address will not be published. Required fields are marked *