Workshop

FORD 5R110W TorqShift

AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
111
Continued on Page 112
TRANSMISSION ASSEMBLY
INTERNAL COMPONENTS (CONT'D)
44. Rotate the transmission in fixture so that oil
pan is facing down.
45. Check turbine/intermediate shaft speed sensor
as shown in Figure 184.
46. Install new "O" ring on turbine/intermediate
speed sensor, as shown in Figure 185.
47. Lubricate "O" ring and install the speed sensor
as shown in Figure 185.
48. Torque speed sensor bolt to 9 N•m (80 in.lb.).
Copyright © 2004 ATSG
(1)
(2)
(3)
(4)
Turbine Shaft And
Intermediate Shaft
Speed Sensor
Gray/Orange
Green/White
Pink/White
Black/White
View Looking Into
Turbine Shaft And
Intermediate Shaft Speed
Sensor Connector
TSS Sig
Grnd
Ref Volt
ISS Sig
(TSS) Terminals 1 and 3 = 325-485 Ohms @ 70°F
(ISS) Terminals 1 and 4 = 325-485 Ohms @ 70°F
Turbine Shaft Speed (TSS) Sensor and
Intermediate Shaft Speed (ISS) Sensor
Figure 184
FordFord
RETAINING
BOLT
"O" RING
TURBINE/INTERMEDIATE
SHAFT SPEED SENSOR
Figure 185
Copyright © 2004 ATSG

Leave a Reply

Your email address will not be published. Required fields are marked *