Workshop

FORD 5R110W TorqShift

AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
109
Figure 182
Copyright © 2004 ATSG
INTERNAL COMPONENTS (CONT'D)
37. Torque all of the solenoid body retaining bolts
to 10 N•m (89 in.lb.), beginning in the center
and working in a circle outward.
38. Install the transmission range sensor connector,
as shown in Figure 182.
39. Install a new pan gasket on the case surface, as
shown in Figure 182.
Note: Pan gasket is reuseable as long as no
beads are broken.
Continued on Page 110
Copyright © 2004 ATSG
FLUID FILTER
FLUID PAN GASKET
(REUSABLE)
CONNECT THE TRANSMISSION
RANGE SENSOR CONNECTOR
FILTER SEAL
40. Install a new fluid filter and seal, as shown in
Figure 182.
Note: Be sure old filter seal has been removed
from pump bore before installing filter.
41. Ensure that all internal harness connectors are
connected properly.

Leave a Reply

Your email address will not be published. Required fields are marked *