AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
INTERNAL COMPONENTS (CONT'D)
Continued on Page 109
33. Install pre-assembled solenoid body assembly,
as shown in Figure 180.
34. Install the solenoid body to case bolts in their
proper locations, as there are various lengths.
Note: Use the chart in Figure 181 for the
proper location of the bolts.
Copyright © 2004 ATSG
SOLENOID BODY AND
TO CASE (67.5MM)
TO CASE (42 MM)
TO CASE (30 MM)
35. Use care when pushing case connector through
the case bore so as not to damage the "O" ring.
36. Ensure that the manual valve is engaged with
the inside detent lever.