Workshop

FORD 5R110W TorqShift

7 OIL PUMP TO CASE RETAINING BOLTS (9 REQUIRED).
8 OIL PUMP ASSEMBLY.
10 PUMP TO COAST CLUTCH DRUM (NO 1) THRUST WASHER.
13 PUMP SUPPORT TO COAST CLUTCH (NO 2) THRUST BEARING.
Copyright © 2004 ATSG Copyright © 2004 ATSG
8
13
10
7
KXV
9.8
3C3R3C3R
3C3R3C3R
0701C0701C
0701C0701C
KXV
9.8
KXV
9.8
KXV
9.8
KXV
9.8
KXV
9.8
KXV
9.8
KXV
9.8
KXV
9.8
TRANSMISSION ASSEMBLY
INTERNAL COMPONENTS (CONT'D)
TORQUE PUMP BOLTS TO
27 N•M (20 FT.LB.)
Continued on Page 106
26. Install the pre-assembled oil pump assembly, as
shown in Figure 176.
Note: Ensure that number 1 thrust washer
and number 2 thrust bearing are still in place,
on back side of pump.
27. Install the nine new retaining bolts, as shown
in Figure 176, and remove the locating dowels.
28. Torque the nine pump to case bolts, as shown
in Figure 177, to 27 N•m (20 ft.lb.).
AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
105
Figure 177Figure 176

Leave a Reply

Your email address will not be published. Required fields are marked *