SIDE STEP > REASSEMBLY

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. INSTALL NO. 1 SIDE STEP STAY SUB-ASSEMBLY LH
  1. Install a nose piece to an air riveter or hand riveter.

  1. Insert the mandrel part of a new rivet into the nose piece.



    B277860
  1. Using the riveter, install the No. 1 side step stay with the 2 rivets as shown in the illustration.

    HINT:
    If the rivet cannot be cut, pull it once and cut it.

    NOTICE:

    1. B171664E15
      Do not pry the rivet with the riveter as this will cause damage to the riveter and mandrel.
      Text in Illustration 
      *1
      Riveter
      *2
      Mandrel
      *a
      INCORRECT
      *b
      CORRECT

    2. B172390E14
      Confirm that the rivets are seated properly against the No. 1 side step stay.
    3. Do not tilt the riveter when installing the rivet to the No. 1 side step stay.
    4. Do not leave any space between the rivet head and No. 1 side step stay.
      Text in Illustration 
      *1
      Riveter
      *a
      INCORRECT
      *b
      CORRECT

    5. B172391E13
      Do not leave any space between the No. 1 side step stay and step plate. Firmly hold together the 2 items while installing the rivet.
      Text in Illustration 
      *1
      Riveter
      *a
      INCORRECT
      *b
      CORRECT


2. INSTALL NO. 2 SIDE STEP BRACKET LH
  1. Install a nose piece to an air riveter or hand riveter.

  1. Insert the mandrel part of a new rivet into the nose piece.



    B277861
  1. Using the riveter, install the No. 2 side step bracket with the 2 rivets as shown in the illustration.

    HINT:
    If the rivet cannot be cut, pull it once and cut it.

    NOTICE:

    1. B171664E15
      Do not pry the rivet with the riveter as this will cause damage to the riveter and mandrel.
      Text in Illustration 
      *1
      Riveter
      *2
      Mandrel
      *a
      INCORRECT
      *b
      CORRECT

    2. B172390E14
      Confirm that the rivets are seated properly against the No. 2 side step bracket.
    3. Do not tilt the riveter when installing the rivet to the No. 2 side step bracket.
    4. Do not leave any space between the rivet head and No. 2 side step bracket.
      Text in Illustration 
      *1
      Riveter
      *a
      INCORRECT
      *b
      CORRECT

    5. B172391E13
      Do not leave any space between the No. 2 side step bracket and step plate. Firmly hold together the 2 items while installing the rivet.
      Text in Illustration 
      *1
      Riveter
      *a
      INCORRECT
      *b
      CORRECT


3. INSTALL NO. 3 SIDE STEP BRACKET LH
  1. Install a nose piece to an air riveter or hand riveter.

  1. Insert the mandrel part of a new rivet into the nose piece.



    B277862
  1. Using the riveter, install the No. 3 side step bracket with the 2 rivets as shown in the illustration.

    HINT:
    If the rivet cannot be cut, pull it once and cut it.

    NOTICE:

    1. B171664E15
      Do not pry the rivet with the riveter as this will cause damage to the riveter and mandrel.
      Text in Illustration 
      *1
      Riveter
      *2
      Mandrel
      *a
      INCORRECT
      *b
      CORRECT

    2. B172390E14
      Confirm that the rivets are seated properly against the No. 3 side step bracket.
    3. Do not tilt the riveter when installing the rivet to the No. 3 side step bracket.
    4. Do not leave any space between the rivet head and No. 3 side step bracket.
      Text in Illustration 
      *1
      Riveter
      *a
      INCORRECT
      *b
      CORRECT

    5. B172391E13
      Do not leave any space between the No. 3 side step bracket and step plate. Firmly hold together the 2 items while installing the rivet.
      Text in Illustration 
      *1
      Riveter
      *a
      INCORRECT
      *b
      CORRECT


4. INSTALL STEP PLATE COVER LH
  1. Attach the 17 claws to install the step plate cover.