AUDIO AND VISUAL SYSTEM (for Radio Receiver Type) > Portable Player cannot be Connected Manually/Automatically

for Preparation Click here


INSPECTION PROCEDURE

HINT:
Some versions of "Bluetooth" compatible audio players may not function properly, or the functions may be limited using the radio receiver assembly, even if the portable audio player itself can play files (Click here).
1.CHECK CONNECTED DEVICE SETTINGS
  1. Check if the portable player is registered as a connected device.

    NOTICE:
    If a cellular phone is used as a portable player, it must be registered independently from the registration that is performed for the hands-free system.

    HINT:
    Only 5 portable players can be registered.
    Result 
    Result
    Proceed to
    The portable player is registered as a connected device.
    A
    The portable player is not registered as a connected device.
    B


B
REGISTER PORTABLE PLAYER AS CONNECTED DEVICE
A


2.CHECK SYMPTOMS
  1. Check the connection condition between the portable player and radio receiver assembly.

    HINT:
    The portable player cannot be connected under any of the following conditions:
    1. The portable player is connected to another device.
    2. The portable player is connected to the radio receiver assembly using the handsfree function.
    3. The radio receiver assembly has cleared the portable player registration.
    4. The portable player is off.
    Result 
    Result
    Proceed to
    The portable player is registered as a connected device.
    A
    The portable player is not registered as a connected device.
    B


B
Go to step 4
A


3.CHECK AUTOMATIC CONNECTION SETTINGS
  1. Check the automatic connection settings of the "Bluetooth" audio.

    1. Turn the ignition switch off.

    2. Turn the ignition switch to ON.

      OK:
      The portable player is automatically recognized by the radio receiver assembly.


NG
TURN "Bluetooth" POWER TO ON
OK


4.CHECK PORTABLE PLAYER STATUS
  1. Check the status of the portable player.

    1. Check that the portable player is not in standby mode.

    2. Check that the portable player is not connected to another device (headphones etc.).

      OK:
      The portable player is not in standby mode and not connected to another device (headphones etc.).


NG
TAKE PORTABLE PLAYER OUT OF STANDBY MODE AND DISCONNECT OTHER DEVICES (HEADPHONES etc.)
OK


5.CHECK USING ANOTHER "Bluetooth" AUDIO COMPATIBLE VEHICLE OF SAME MODEL
  1. Check if the portable player can be connected manually/automatically on another "Bluetooth" audio compatible vehicle of the same model.

    OK:
    The portable player can be connected manually/automatically.


NG
PORTABLE PLAYER IS NOT COMPATIBLE
OK


6.REMOVE ADDITIONAL DEVICES WHICH USE RADIO WAVES
  1. Remove additional devices which use radio waves.

  1. Check if the portable player can be connected manually/automatically.

    OK:
    The portable player can be connected manually/automatically.


NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

END (ADDITIONAL DEVICES ARE DEFECTIVE)